Repositório Digital

A- A A+

Black wattle tannin as steel corrosion inhibitor

.

Black wattle tannin as steel corrosion inhibitor

Mostrar registro completo

Estatísticas

Título Black wattle tannin as steel corrosion inhibitor
Autor Peres, Rafael Silveira
Cassel, Eduardo
Azambuja, Denise Schermann
Abstract In order to reduce the environmental impacts caused by chemical substances harmful to the environment and human health, the black wattle tannin can be used as an environmentally friendly corrosion inhibitor in acid and near neutral media. This paper provides information on the application of black wattle tannin as an inhibitor against the corrosion of carbon steel. The inhibition was evaluated using potentiodynamic polarization (PP) and electrochemical impedance spectroscopy (EIS) at room temperature in aerated 0.1 mol Lˉ¹ Na2SO4 (pH 6.0 and 2.5). The black wattle tannin when used as a corrosion inhibitor is more effective at acidic pH, its efficiency being dependent on its concentration. At the higher pH value (pH 6.0), a blue-black film (ferric tannate) with a short-term protection against corrosion was formed in aerated aqueous solution. At pH 2.5, this blue-black film was not observed.
Contido em ISRN Corrosion. New York. Vol. 2012, (2012), 9 p.
Assunto Acácia negra
Aço carbono : Corrosão
Físico-química
Inibidores de corrosão
Taninos
Origem Estrangeiro
Tipo Artigo de periódico
URI http://hdl.handle.net/10183/106641
Arquivos Descrição Formato
000934317.pdf (1.860Mb) Texto completo (inglês) Adobe PDF Visualizar/abrir

Este item está licenciado na Creative Commons License

Este item aparece na(s) seguinte(s) coleção(ões)


Mostrar registro completo

Percorrer



  • O autor é titular dos direitos autorais dos documentos disponíveis neste repositório e é vedada, nos termos da lei, a comercialização de qualquer espécie sem sua autorização prévia.
    Projeto gráfico elaborado pelo Caixola - Clube de Criação Fabico/UFRGS Powered by DSpace software, Version 1.8.1.