Repositório Digital

A- A A+

Hybrid films with (trimethoxysilylpropyl) methacrylate (TMSM), poly (Methyl methacrylate) PMMA and tetraethoxysilane (TEOS) applied on tinplate

.

Hybrid films with (trimethoxysilylpropyl) methacrylate (TMSM), poly (Methyl methacrylate) PMMA and tetraethoxysilane (TEOS) applied on tinplate

Mostrar registro completo

Estatísticas

Título Hybrid films with (trimethoxysilylpropyl) methacrylate (TMSM), poly (Methyl methacrylate) PMMA and tetraethoxysilane (TEOS) applied on tinplate
Autor Kunst, Sandra Raquel
Ludwig, Gustavo Alberto
Cardoso, Henrique Ribeiro Piaggio
Santana, Joseane de Andrade
Sarmento, Victor Hugo Vitorino
Malfatti, Célia de Fraga
Abstract The tetraethoxysilane (TEOS) influences morphological and electrochemical properties of hybrid films by function of concentration. Moreover, the use of acetic acid as a catalyst in the sol enables a more complete hydrolysis of the silane precursors due to the fact that the acetic acid goes through a more complete ionization when in aqueous solution. The aim of this paper is to study the effect of the concentration of tetraethoxysilane (TEOS) on the protective properties of the film on tinplate substrate. The tinplate was coated with a hybrid film obtained from a sol-gel method constituted of the following alkoxide precursors: 3 - (trimetoxisililpropil) methacrylate (TMSM) and poly(methyl methacrylate) PMMA. The effect of tetraethoxysilane (TEOS) concentration has also been evaluated. The films hydrolysis was performed at a pH value of 3.0 using acetic acid as a catalyst. The films were obtained by dip-coating process, cured for 3 hours at 160 °C. The film morphology was evaluated by SEM and profilometry. The electrochemical behavior of the films was evaluated by open circuit potential monitoring, potentiodynamic polarization and electrochemical impedance spectroscopy. The film hydrophobicity was determined by contact angle measurements. The studied films have shown good performance as to corrosion resistance on tinplate. The hybrid film which was obtained through the addition of an excessive amount of TEOS (T3A3) showed increased thickness. Nevertheless, due to an intense densification of the film, promoted by the addition of TEOS, a formation of cracks was registered, thereby compromising the corrosion resistance.
Contido em Materials research : ibero-american journal of materials. São Carlos. Vol. 17, suppl. 1 (Aug. 2014), p. 75-81
Assunto Filmes híbridos
Folha de flandres
Resistência à corrosão
[en] Corrosion
[en] Hybrid films
[en] Tinplate
Origem Nacional
Tipo Artigo de periódico
URI http://hdl.handle.net/10183/115570
Arquivos Descrição Formato
000963903.pdf (3.350Mb) Texto completo (inglês) Adobe PDF Visualizar/abrir

Este item está licenciado na Creative Commons License

Este item aparece na(s) seguinte(s) coleção(ões)


Mostrar registro completo

Percorrer



  • O autor é titular dos direitos autorais dos documentos disponíveis neste repositório e é vedada, nos termos da lei, a comercialização de qualquer espécie sem sua autorização prévia.
    Projeto gráfico elaborado pelo Caixola - Clube de Criação Fabico/UFRGS Powered by DSpace software, Version 1.8.1.