Mostrar registro simples

dc.contributor.advisorTeixeira, Sergio Henrique de Oliveirapt_BR
dc.contributor.authorKhan, Sherdilpt_BR
dc.date.accessioned2015-12-09T02:41:45Zpt_BR
dc.date.issued2015pt_BR
dc.identifier.urihttp://hdl.handle.net/10183/130835pt_BR
dc.description.abstractIn this work thin films and nanotubes (NTs) of Ta3N5 have been synthesized by thermal nitridation of amorphous Ta2O5 starting materials. Ta2O5 thin films were prepared by radio frequency magnetron sputtering; whereas Ta2O5 NTs were prepared by electrochemical anodization. With the aim to investigate electronic, optical structural, surface, and particularly photoelectrochemical properties; the Ta3N5 samples were studied employing thorough characterization techniques. X-ray diffraction and high resolution electron microscopy analyses have shown that Ta3N5 thin films exhibit monoclinic phase whereas Ta3N5 NTs present orthorhombic crystalline structure of Ta3N5. Utilizing Ta3N5 thin films the optical constants were obtained by spectroscopic ellipsometry. The obtained dielectric constant of Ta3N5 thin film was in the range of 7–9 in the visible spectral region (3.1–1.7 eV). After studying Ta3N5 thin films the investigations were focused on the NTs. To preserve the tubular morphology of Ta3N5 NTs at higher nitridation temperatures the anodization was optimized by fine-tuning the adherence and the wall thickness of Ta2O5 NTs. The Rietveld refinement has confirmed that in addition to oxygen substitutional defects the nitridation process results in Schottky defects of nitrogen and tantalum within the crystalline structure. Utilizing cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy it was observed for the first time that lower photoelectrochemical performance of pristine T3N5 NTs is attributed to the presence of trapping states associated with T3N5 NTs–electrolyte interface in standard electrolyte. Even highly crystalline pristine Ta3N5 NTs could not cope with these trapping states. These states devastate the performance of the photoanode and present the necessity of applying higher biasing (> 1.23 V vs RHE); which is a major drawback of using pristine Ta3N5 NTs for water splitting. These were not observed in the electrolyte containing sacrificial reagent due to its efficient hole scavenging ability. Electrochemical Impedance spectroscopy has shown that the charge transportation at the Semiconductor–Electrolyte interface is highly influenced by the nitridation conditions; however, the flat band of pristine Ta3N5 NTs remained unchanged. It was found that for improved photoelectrochemical performance of Ta3N5 NTs the nitridation temperature should be high enough to improve crystallinity but the time should be short enough to preserve the tubular morphology. The improved photoelectrochemical performance was related to low oxygen content, high crystallinity, low defects formation and low interfacial charge transfer at Semiconductor–Electrolyte interface, obtained at optimum anodization and nitridation conditions.en
dc.description.abstractNeste trabalho, filmes finos e nanotubos (NTs) de Ta3N5 foram sintetizados por termo-nitretação a partir de Ta2O5 amorfo. Filmes finos de Ta2O5 foram preparados por rádio frequência magnetron sputtering e os nanotubos foram preparados por anodização electroquímica. Foram investigadas as propriedades eletrônicas, ópticas, estruturais, superfíciais e, particularmente, as propriedades fotoeletroquímicas dos amostras de Ta3N5. Difração de raios-X e análises de microscopia eletrônica de alta resolução mostraram que filmes finos de Ta3N5 apresentam fase monoclínica, enquanto nanotubos de Ta3N5 estrutura cristalina ortorrômbica. Para os filmes finos de Ta3N5 foram obtidos constantes ópticas por elipsometria espectroscópica. O valor obtido para a constante dielétrica foi de 7–9 na região espectral visível (3,1-1,7 eV). Após o estudo dos filmes finos de Ta3N5 as investigações centraram-se nos nanotubos. Para preservar a morfologia tubular em altas temperaturas de nitretação, o processo de anodização foi otimizado para aumentar a aderência e a espessura da parede dos nanotubos de Ta2O5.O refinamento Rietveld mostrou que o processo de nitretação resulta em defeitos Schottky de nitrogênio e tântalo, além de isso, a amostra apresenta defeitos substitucionais do oxigênio. Utilizando voltametria cíclica, cronoamperometria e espectroscopia de impedância electroquímica foi observado que o desempenho fotoeletroquímico inferior dos nanotubos puros de Ta3N5 é atribuído à presença de estados aprisionados associados a interface dos nanotubos de Ta3N5–electrólito com electrólito padrão. Ainda, mesmo altamente cristalinos os nanotubos puros de Ta3N5 não podem suportar os estados de aprisionamento mencionados, que prejudicam o desempenho do fotoanodo e, assim, necessitam a aplicação de maior polarização externa (> 1,23 V vs RHE). Estes resultados não foram observados no electrólito contendo reagente de sacrifício. A espectroscopia de impedância electroquímica mostrou que o transporte de carga na interface de semicondutores–eletrólito é altamente influenciada pelas condições de nitretação. No entanto, a banda plana de nanotubos de Ta3N5 puro mantem-se inalterada. Verificou-se que para um melhor desempenho fotoelectroquímico das nanotubos de Ta3N5 a temperatura de nitretação deve ser suficientemente elevada para melhorar a cristalinidade, mas o tempo deve ser curto o suficiente para preservar a morfologia tubular. A melhora do desempenho fotoeletroquímico foi relacionada com baixo teor de oxigênio, alta cristalinidade, baixa formação de defeitos e baixa transferência de carga na interface do semicondutor com o eletrólito, obtidos em condições de anodização e nitretação ideais.pt_BR
dc.format.mimetypeapplication/pdfpt_BR
dc.language.isoengpt_BR
dc.rightsOpen Accessen
dc.subjectFilmes finospt_BR
dc.subjectNanotubospt_BR
dc.subjectPropriedades fisico-quimicaspt_BR
dc.subjectNitreto de tântalopt_BR
dc.subjectFotoeletroquímicapt_BR
dc.subjectAnodizaçãopt_BR
dc.subjectNitretaçãopt_BR
dc.subjectDifração de raios Xpt_BR
dc.subjectMicroscopia eletrônica de varredurapt_BR
dc.subjectEspectroscopia de impedância eletroquímicapt_BR
dc.titleSyntheses and characterizations of Ta3N5 thin films and nanotubes for photoelectrochemical applications under visible light irradiationpt_BR
dc.typeTesept_BR
dc.contributor.advisor-coSantos, Marcos José Leitept_BR
dc.identifier.nrb000979399pt_BR
dc.degree.grantorUniversidade Federal do Rio Grande do Sulpt_BR
dc.degree.departmentInstituto de Físicapt_BR
dc.degree.programPrograma de Pós-Graduação em Físicapt_BR
dc.degree.localPorto Alegre, BR-RSpt_BR
dc.degree.date2015pt_BR
dc.degree.leveldoutoradopt_BR


Thumbnail
   

Este item está licenciado na Creative Commons License

Mostrar registro simples