Repositório Digital

A- A A+

Influence of the addition of montmorillonite in an epoxy powder coating applied on carbon steel

.

Influence of the addition of montmorillonite in an epoxy powder coating applied on carbon steel

Mostrar registro completo

Estatísticas

Título Influence of the addition of montmorillonite in an epoxy powder coating applied on carbon steel
Autor Piazza, Diego
Baldissera, Alessandra Fiorini
Kunst, Sandra Raquel
Rieder, Ester Schmidt
Scienza, Lisete Cristine
Ferreira, Carlos Arthur
Zattera, Ademir José
Abstract Polymer coatings have been used for the corrosion protection of metal surfaces acting as a physical barrier against several corroding media. In spite of the good efficiency of these coatings their resistance is limited due to the presence of localized defects which give place to localized corrosion. Aiming to improve the barrier properties of these coatings this work has proposed the use of nanocomposites as powder coatings based on a standard formulation of a commercial powder varnish. Nanocomposites with 2 and 4 wt% contents of organophilic montmorillonite (OMMT) were obtained in the molten state through of a co-rotating twin-screw extruder. The application of the nanocomposite coatings was performed by electrostatic pulverization on mild steel panels. The coatings were characterized to determine their structure using X-ray diffraction (XRD). The morphologies of the coatings were assessed using transmission electron microscopy (TEM). Gloss and adhesion measurements and the flexibility and impact resistance of the coatings were included in the physical assessment of the coatings. The corrosion performance was evaluated by the salt spray test and by electrochemical impedance spectroscopy (EIS). The coatings with clays presented predominantly exfoliated structures, with good dispersion of OMMT in the epoxy matrix. The addition of OMMT reduced the impact resistance, flexibility and gloss but increased the barrier properties of the coatings. The best corrosion performance in NaCl solution was achieved for 4 wt% OMMT.
Contido em Materials research : ibero-american journal of materials. São Carlos, SP. Vol. 18, n. 5 (Sept./Oct. 2015), p. 897-903
Assunto Corrosao
Montmorilonita
Nanocompósitos
Resina epoxi
Revestimento
[en] Corrosion
[en] Epoxy resin
[en] Montmorillonite
[en] Nanocomposite
[en] Powder coatings
Origem Nacional
Tipo Artigo de periódico
URI http://hdl.handle.net/10183/130866
Arquivos Descrição Formato
000979348.pdf (2.288Mb) Texto completo (inglês) Adobe PDF Visualizar/abrir

Este item está licenciado na Creative Commons License

Este item aparece na(s) seguinte(s) coleção(ões)


Mostrar registro completo

Percorrer



  • O autor é titular dos direitos autorais dos documentos disponíveis neste repositório e é vedada, nos termos da lei, a comercialização de qualquer espécie sem sua autorização prévia.
    Projeto gráfico elaborado pelo Caixola - Clube de Criação Fabico/UFRGS Powered by DSpace software, Version 1.8.1.