Mostrar registro simples

dc.contributor.advisorDal Molin, Denise Carpena Coitinhopt_BR
dc.contributor.advisorPaulon, Vladimir Antoniopt_BR
dc.contributor.authorValduga, Lailapt_BR
dc.date.accessioned2016-05-28T02:09:24Zpt_BR
dc.date.issued2007pt_BR
dc.identifier.urihttp://hdl.handle.net/10183/142145pt_BR
dc.description.abstractA reação álcali-agregado é uma patologia do concreto conhecida há mais de 60 anos no meio técnico, e envolve os álcalis, provenientes em maior parte do cimento, e certos constituintes mineralógicos dos agregados. O produto desta reação é um gel higroscópico, que, em contato com a água, aumenta de volume consideravelmente. Os danos decorrentes da reação envolvem principalmente o desenvolvimento de um quadro de fissuração intenso, o que acarreta outras diversas manifestações patológicas, e movimentações de peças estruturais. Os relatos mais freqüentes de ocorrência da reação sempre foram em estruturas hidráulicas, tais como as barragens, em função do permanente contato com a água. Entretanto, nos últimos anos, diversos outros tipos de estruturas têm sido afetados, inclusive fundações de edificios, deixando o problema em evidência. O único modo de combater a reação é prevení-la através do uso de adições minerais, e para tal se faz necessário avaliar o agregado em questão, dispondo de um método de ensaio confiável. Este trabalho buscou analisar um dos métodos de ensaio mais utilizados no mundo todo para avaliar a reação álcali-agregado, a ASTM C 1260. Foram modificados alguns parâmetros de moldagem para verificar a influência destes nos resultados de expansão fornecidos pelo ensaio. Avaliaram-se os fatores: relação água/cimento, consistência da argamassa e forma do grão de agregado, e no total foram conduzidos 63 diferentes ensaios de expansão para analisar a influência destes fatores. Ensaios auxiliares foram realizados para justificar os resultados, e utilizou-se tratamento estatístico para verificação da validade dos mesmos. Foi observado que a forma de britagem do agregado, para posterior realização do ensaio, interfere diretamente nas condições de moldagem. E, o mais importante: isto resulta em expansões diferenciadas na idade de avaliação do agregado. Para evitar classificações errôneas de agregados através do uso da ASTM C 1260, uma norma usada em vários países, sugere-se que sejam fixados o maior número possível de parâmetros de moldagem.pt_BR
dc.description.abstractThe alkali-aggregate reaction 1s a concrete pathology known for more than 60 years, involving the alkalis (mostly from the cement), and some mineralogical components of the aggregates. The product o f this reaction is a hygroscopic gel that, in contact with water, has its volume greatly increased. The damage resulting from this reaction is mainly a situation of intense craking, which causes other pathological manifestations and movements of the structure. The most frequent reports o f this reaction have always been in hydraulic structures, such as dams, caused by the permanent contact with water. However, in the last few years, many other kinds of structures have been affected, including building foundations; which brought the problem to international evidence. The only way to prevent the expansion caused by the reaction is the use o f mineral admixtures as a substitute o f part o f the cement content, but first it is necessary to evaluate the aggregate in use, with a satisfactory test method. This work' s purpose is to analyze one o f the test methods commonly used throughout the world to evaluate the alkali-aggregate reaction, the ASTM C 1260. Some molding parameters have been modified so as to check their influence on the results of expansion obtained through this test. These factors have been evaluated: water/cement ratio, mortar consistency and shape of the aggregate particle. A total of 63 different tests of expansion were conducted to evaluate their influence. Additional tests were done so as to justify the results, and statistical analysis was used to validate the results. It was observe that the way the aggregate is crushed, for subsequent execution of the test, directly interferes in the conditions of molding. And, the most important: the way the aggregate is crushed results in different expansions and it is increased with the age of the evaluation of the test. To prevent a erroneous classification o f the aggregates through the use of ASTM C 1260, a standard used in many countries, it is suggested that test conditions should be better defined.en
dc.format.mimetypeapplication/pdf
dc.language.isoporpt_BR
dc.rightsOpen Accessen
dc.subjectConcretopt_BR
dc.subjectAlkali-aggregate reactionen
dc.subjectReação álcali-agregadopt_BR
dc.subjectDurabilityen
dc.subjectAccelerated methoden
dc.subjectMateriais de construçãopt_BR
dc.subjectAgregados para construção civilpt_BR
dc.titleInfluência das condições de ensaio da ASTM C 1260 na verificação da reação álcali-agregadopt_BR
dc.typeTesept_BR
dc.identifier.nrb000632283pt_BR
dc.degree.grantorUniversidade Federal do Rio Grande do Sulpt_BR
dc.degree.departmentEscola de Engenhariapt_BR
dc.degree.programPrograma de Pós-Graduação em Engenharia Civilpt_BR
dc.degree.localPorto Alegre, BR-RSpt_BR
dc.degree.date2007pt_BR
dc.degree.leveldoutoradopt_BR


Thumbnail
   

Este item está licenciado na Creative Commons License

Mostrar registro simples