Mostrar registro simples

dc.contributor.advisorMeneguzzi, Alvaropt_BR
dc.contributor.authorSilva, Rodrigo Sanchotenept_BR
dc.date.accessioned2017-03-16T02:20:54Zpt_BR
dc.date.issued2016pt_BR
dc.identifier.urihttp://hdl.handle.net/10183/153285pt_BR
dc.description.abstractA proteção anódica de metais tem como característica a formação de óxidos protetores insolúveis na superfície, o que resulta na passivação do metal, e consequentemente na desaceleração do processo corrosivo. O uso de polímeros intrinsecamente condutores (PIC), como a polianilina (PAni), tem-se apresentado como alternativa de revestimentos ou componente de revestimentos com propriedades anticorrosivas, devido às suas propriedades eletroquímicas de formação de par redox em interfaces metal/revestimento/eletrólito, que podem induzir o efeito de proteção anódica em metais passiváveis. Devido à dificuldade de dissolução da PAni em solventes para a formação de filmes poliméricos, foi formulado neste estudo um binder, formado pela mistura de PAni no estado oxidado e desdopado, com o plastificante não dopante 4-cloro-3-metilfenol e solvente, que foi adicionado à três tintas e uma resina comercial pelo método de moagem ou dispersão em alta rotação na concentração de 1%. As tintas produzidas foram caracterizadas por métodos físico-químicos e morfológicos que apresentaram resultados que indicam um revestimento em que a PAni está em parte na forma de resina e outra parte dispersa como pigmento, com a preservação das principais funções e características desejáveis da PAni para aplicação como revestimento anticorrosivo. Os ensaios eletroquímicos realizados com a exposição dos revestimentos aplicados sobre aço carbono em meio em que esse é passivável, ofereceram respostas que indicam que é possível a passivação e/ou manutenção da passivação do metal de interesse, fazendo com que este se comporte de forma mais nobre, a partir do uso de PAni EB na forma de binder. Estes resultados representam a ação da proteção anódica sem a necessidade da aplicação de uma corrente externa.pt_BR
dc.description.abstractThe anodic protection of metals has as a characteristic the formation of protective insoluble oxides on the surface, which results in the passivation of the metal, and consequently in the deceleration of the corrosive process. The use of intrinsically conductive polymers (ICP), such as polyaniline (PAni), has been presented as an alternative coatings or coating component with anticorrosive properties, due to its electrochemical properties of redox pair formation in metal/coating/electrolyte interfaces, which can induce the anodic protection effect on passivable metals. Due to the difficulty of dissolving PAni in solvents for the formation of polymerics films, it was formulated in this study a binder, formed by a mixture of PAni in the oxidized and desdoped state, with the plasticizer non-doping 4-chloro-3-methylphenol and solvent, which was added to the three paints and a commercial resin by high speed milling or dispersing method in concentation of 1%. The paints produced were characterized by physico-chemical and morphological methods that showed results indicating a coating in which the PAni is partly in the form of resin and the other part dispersed as a pigment, keeping the main functions and desirable characteristics of PAni for application as an anticorrosive coating. The electrochemical tests carried out with the exposition of the coatings applied on carbon steel, in a medium in which it is passivable, offered answers that indicate that it is possible to induce and keep the passivation of the metal substrate, so that it behaves in a way more noble, from the use of PAni EB in the form of binder. These results represent the action of the anodic protection without the necessity of an external current application.en
dc.format.mimetypeapplication/pdf
dc.language.isoporpt_BR
dc.rightsOpen Accessen
dc.subjectAço-carbonopt_BR
dc.subjectAnodizaçãopt_BR
dc.subjectRevestimentopt_BR
dc.subjectCorrosãopt_BR
dc.titleTinta inteligente na proteção anódica de aço carbonopt_BR
dc.typeTesept_BR
dc.identifier.nrb001013868pt_BR
dc.degree.grantorUniversidade Federal do Rio Grande do Sulpt_BR
dc.degree.departmentEscola de Engenhariapt_BR
dc.degree.programPrograma de Pós-Graduação em Engenharia de Minas, Metalúrgica e de Materiaispt_BR
dc.degree.localPorto Alegre, BR-RSpt_BR
dc.degree.date2016pt_BR
dc.degree.leveldoutoradopt_BR


Thumbnail
   

Este item está licenciado na Creative Commons License

Mostrar registro simples