Mostrar registro simples

dc.contributor.authorSouza, Tomaz Fantin dept_BR
dc.contributor.authorSoares, Carla Adriana Theispt_BR
dc.contributor.authorZottis, Julianapt_BR
dc.contributor.authorNunes, Rafael Menezespt_BR
dc.contributor.authorRocha, Alexandre da Silvapt_BR
dc.contributor.authorHirsch, Thomaspt_BR
dc.date.accessioned2013-07-16T01:45:09Zpt_BR
dc.date.issued2013pt_BR
dc.identifier.issn1516-1439pt_BR
dc.identifier.urihttp://hdl.handle.net/10183/75896pt_BR
dc.description.abstractIn this work, a drawing processed was simulated to calculate forces and the resulting residual stresses in the material. The calculated residual stresses were compared with experimentally measured residual stresses by the Neutron Diffraction Method. The modeled process was the Wire Drawing. The necessary parameters to model the process were taken from an industrial currently used process. Rods of an AISI 1045 steel with nominal diameters of 21.46 mm were reduced to 20.25 mm by drawing with an drawing angle of 15°. Compression tests were used to determinate flow curves of the real material an used in the simulation models. The possibility to estimate drawing forces by numerical simulation was evaluated by comparing simulated results with values from empirical equations given by the literature. The results have shown a sufficient accuracy for the calculation of forces, but the comparison of residual stresses has shown differences to the experimentally determined ones that can be minimized by the consideration of high strain rates in the compression tests, anisotropy of the material and kinematic hardening.en
dc.format.mimetypeapplication/pdfpt_BR
dc.language.isoengpt_BR
dc.relation.ispartofMaterials research : ibero-american journal of materials. São Carlos. vol. 16, n. 2 (2013), p. 508-514pt_BR
dc.rightsOpen Accessen
dc.subjectCold drawingen
dc.subjectTensão residualpt_BR
dc.subjectAçopt_BR
dc.subjectResidual stressesen
dc.subjectSimulação numéricapt_BR
dc.subjectNumerical simulationen
dc.titleComparison between neutron diffraction measurements and numerical simulation of residual stresses of a wire-drawing processpt_BR
dc.typeArtigo de periódicopt_BR
dc.identifier.nrb000875376pt_BR
dc.type.originNacionalpt_BR


Thumbnail
   

Este item está licenciado na Creative Commons License

Mostrar registro simples