Evaluation of the adhesion strength of diamond films brazed on K-10 type hard metal
Visualizar/abrir
Data
2004Autor
Tipo
Abstract
The coating of cutting tools with diamond films considerably increases the tool performance due to the combination of the unique tribological properties of diamond with the bulk properties of the substrate (toughness). The tool performance, however, is strongly related to the adhesion strength between the film and the substrate. In this work our main goal was to propose and to test a procedure, based on a tensile strength test, to evaluate the adhesion strength of a diamond wafer brazed on a ha ...
The coating of cutting tools with diamond films considerably increases the tool performance due to the combination of the unique tribological properties of diamond with the bulk properties of the substrate (toughness). The tool performance, however, is strongly related to the adhesion strength between the film and the substrate. In this work our main goal was to propose and to test a procedure, based on a tensile strength test, to evaluate the adhesion strength of a diamond wafer brazed on a hard metal substrate, taking into account the effect of the brazing temperature and time. The temperature range studied was from 800 to 980 °C and the brazing time ranged from 3 to 40 min. The obtained results could be used to optimize the costs and time required to the production of high performance cutting tools with brazed diamond wafers. ...
Contido em
Materials research : ibero-american journal of materials. São Carlos, SP. Vol. 7, no.2 (June 2004), p.293-297
Origem
Nacional
Coleções
-
Artigos de Periódicos (39149)Ciências Exatas e da Terra (5955)
Este item está licenciado na Creative Commons License