Show simple item record

dc.contributor.authorDalcin, Rafael Lucianopt_BR
dc.contributor.authorRocha, Alexandre da Silvapt_BR
dc.contributor.authorCastro, Victor Velho dept_BR
dc.contributor.authorOliveira, Leonardo Fonsecapt_BR
dc.contributor.authorNeves, Júlio César Klein daspt_BR
dc.contributor.authorSilva, Carlos Henrique dapt_BR
dc.contributor.authorMalfatti, Célia de Fragapt_BR
dc.date.accessioned2021-07-06T04:45:17Zpt_BR
dc.date.issued2021pt_BR
dc.identifier.issn1516-1439pt_BR
dc.identifier.urihttp://hdl.handle.net/10183/223172pt_BR
dc.description.abstractIn this study, the sliding wear of a DIN 18MnCrSiMo6-4 continuous cooling bainitic steel plasma nitrided with a nitrogen rich gas composition was investigated. To evaluate the influence of processing time and temperature on mechanical and microstructural characteristics of nitrided layer, the samples were nitrided at 400, 450, 500 and 550 °C for 3, 6 and 9 h. The produced nitrided layers were characterized concerning the microstructure, phase composition, microhardness and surface roughness. The samples were tested by ball-on-flat reciprocating dry sliding for friction coefficient and wear analysis. The tests were stopped after a given damage criteria involving the rapid growth of the friction coefficients and wear. The correlation of the different treatment parameters and resulting case depths and surface hardness with sliding distance at the time of microcracks formation or delamination of the surface layer was evaluated statistically by the analysis of variance (ANOVA). The plasma nitrided samples at 550 °C showed better wear performances in the ball-on-flat tests than the other groups investigated, since these samples have a thicker compound layer and diffusion zone higher than the other conditions investigated. In general, the beginning wear is slower because of the hardest region of the compound layer.en
dc.format.mimetypeapplication/pdfpt_BR
dc.language.isoengpt_BR
dc.relation.ispartofMaterials research : ibero-american journal of materials. São Carlos, SP. Vol. 24, n. 4 (2021), e20200592, 13 p.pt_BR
dc.rightsOpen Accessen
dc.subjectPlasma nitridingen
dc.subjectAçopt_BR
dc.subjectNitretação a plasmapt_BR
dc.subjectContinuous cooling bainitic steelen
dc.subjectWear resistanceen
dc.subjectResistência ao desgastept_BR
dc.subjectReciprocating dry slidingen
dc.titleInfluence of plasma nitriding with a nitrogen rich gas composition on the reciprocating sliding wear of a DIN 18MnCrSiMo6-4 steelpt_BR
dc.typeArtigo de periódicopt_BR
dc.identifier.nrb001127270pt_BR
dc.type.originNacionalpt_BR


Files in this item

Thumbnail
   

This item is licensed under a Creative Commons License

Show simple item record