Mostrar registro simples

dc.contributor.advisorPacheco, Joyson Luizpt_BR
dc.contributor.authorVieira, Sandro Diaspt_BR
dc.date.accessioned2011-11-23T01:19:49Zpt_BR
dc.date.issued2011pt_BR
dc.identifier.urihttp://hdl.handle.net/10183/34742pt_BR
dc.description.abstractNeste trabalho foram utilizados os conceitos de célula flexível de manufatura e de automação utilizando a robótica para desenvolver uma célula robotizada de acabamento de instrumentos cirúrgicos forjados, com o objetivo de obter aumento de produção e flexibilizar o sistema de manufatura. Na produção manual de acabamento dos instrumentos cirúrgicos incluídos no estudo são realizados processos de lixamento, eletropolimento, polimento vibratório, jateamento e polimento com manta sintética e escova. Foi identificado que o sistema utilizando trabalho manual restringe a produtividade a um número de pinças insuficiente para atender à demanda do mercado. Desse modo, foi desenvolvida uma célula robotizada de acabamento, com a intenção de suprir a necessidade do aumento de produção dos instrumentos cirúrgicos. Em paralelo ao desenvolvimento da célula flexível de manufatura, estudaram-se os processos de acabamento utilizados, resultando na eliminação de etapas de acabamento no processo automatizado. Com a célula flexível de manufatura desenvolvida se obteve um aumento de produção de 96,87 % e uma redução nos custos de 50,53 % em relação à linha manual. Os produtos cuja manufatura se deseja automatizar são pinças hemostáticas, de apreensão e de campo que foram selecionadas através da análise da demanda produtiva. A matéria-prima utilizada nestes instrumentos é aço inoxidável martensítico, de denominação AISI 420D. O processo de fabricação utilizado nos componentes é o forjamento, que permite a melhora das propriedades mecânicas, modificando a disposição dos constituintes do material deformado. No entanto, foi avaliada de forma experimental a viabilidade de substituição do forjamento pelo corte laser, visando a eliminação do processo de lixamento dos componentes, com consequente aumento na taxa de produção, o que não foi possível devido à menor resistência obtida pelos componentes assim produzidos.pt_BR
dc.description.abstractIn this study, were used the concepts of flexible cell manufacturing and automation using robotics to develop a finishing in forged surgical instruments robot cell, in order to get increased production and a more flexible manufacturing system. On completion of the manual production of surgical instruments included in the study of processes are performed grinding, electropolishing, vibratory polishing, sandblasting and polishing synthetic blanket and brush. Was identified that the system using manual labor productivity to a limited number of tweezers insufficient to meet market demand. Thus, was developed a robotic finishing cell, with the intention of meeting the need for increasing production of surgical instruments. In parallel to the development of flexible manufacturing cell, were studied the finishing processes used, resulting in the elimination of finishing steps in the automated process. With the flexible manufacturing cell development was obtained an increase of 96.87% and production cost savings of 50.53% compared to the online manual. The products whose manufacture is desirable to automate hemostat, apprehension and field tweezers that were selected by analyzing the production demand. The raw material used in these instruments is martensitic stainless steel, designations AISI 420D. The manufacturing process used in the components is forginig, which allows the improvement of mechanical properties by modifying the arrangement of the constituents of the deformed material. However, it was experimentally evaluated the feasibility of replacing the forging by laser cutting, in order to eliminate the process of grinding the components, with consequent increase in production rate, which was not possible due to a lower resistance obtained by the components thus produced.en
dc.format.mimetypeapplication/pdf
dc.language.isoporpt_BR
dc.rightsOpen Accessen
dc.subjectFlexible manufacturing cellsen
dc.subjectInstrumentos cirúrgicospt_BR
dc.subjectForjamentopt_BR
dc.subjectRoboticsen
dc.subjectSurgical instrumentsen
dc.subjectRobóticapt_BR
dc.subjectForgingen
dc.subjectFinishingen
dc.titleProjeto conceitual de uma célula flexível de manufatura para acabamento de instrumentos cirúrgicos por Sandro Dias Vieirapt_BR
dc.typeDissertaçãopt_BR
dc.identifier.nrb000789324pt_BR
dc.degree.grantorUniversidade Federal do Rio Grande do Sulpt_BR
dc.degree.departmentEscola de Engenhariapt_BR
dc.degree.programPrograma de Pós-Graduação em Engenharia Mecânicapt_BR
dc.degree.localPorto Alegre, BR-RSpt_BR
dc.degree.date2011pt_BR
dc.degree.levelmestradopt_BR


Thumbnail
   

Este item está licenciado na Creative Commons License

Mostrar registro simples