Electrical isolation of n-type and p-type InP layers by proton bombardment
Fecha
2001Materia
Abstract
The evolution of the sheet resistance (Rs) of n-type and p-type conductive InP layers during proton irradiation and the stability of the formed isolation during postirradiation annealing were investigated. It was found that the threshold dose (Dth) to convert the conductive layer to a highly resistive one is different for n- and p-type samples with similar initial free carrier concentrations. From our results, one infers that the antisite defects and/or related defect complexes formed by the re ...
The evolution of the sheet resistance (Rs) of n-type and p-type conductive InP layers during proton irradiation and the stability of the formed isolation during postirradiation annealing were investigated. It was found that the threshold dose (Dth) to convert the conductive layer to a highly resistive one is different for n- and p-type samples with similar initial free carrier concentrations. From our results, one infers that the antisite defects and/or related defect complexes formed by the replacement collisions are the carrier trapping centers, where InP is responsible for electron trapping and PIn for the hole trapping. A time dependence of the Rs was observed after each irradiation step to doses of -≈ Dth and higher. This time variation is related to metastable processes involving free carriers. The thermal stability of the isolation of n-type samples is limited to temperatures lower than 200 °C, irrespectively of the irradiated dose. For p-type samples the thermal stability of electrical isolation is extended to 450–500 °C. ...
En
Journal of applied physics. Melville. Vol. 89, no. 10 (May 2001), p. 5343-5347
Origen
Estranjero
Colecciones
-
Artículos de Periódicos (39123)Ciencias Exactas y Naturales (5955)
Este ítem está licenciado en la Creative Commons License